NYC's First Certified Passive House, A Brooklyn Brownstone

NYC’s First Certified Passive House, A Brooklyn Brownstone

EDITOR’S NOTE: I love the idea that a high quality renovation can also be environmentally responsible. Thankfully, it’s become easier to be earth-conscious without adding to the budget. Standards and guidelines have been created to help professionals as well as homeowners set goals for energy efficiency. LEED (Leadership in Energy and Environment Design) is a rating system for ‘green’ design and construction that helps owners use resources efficiently. “Passive house” is another standard that results in buildings that have extremely low energy usage for heating and cooling. According to Fabrica718’s write up of the Tighthouse, featured below, Passive Houses consume approximately 90% less heat energy than the average home and 75% less energy overall. -RJ Diaz)


A thermal image showing the Tighthouse (blue ) among its neighbors.

Sustainable Brownstone Transformation in Brooklyn

An excerpt from a post that originally appeared on on March 28, 2013



How do you make a Brooklyn brownstone more sustainable? First, get rid of the brownstone.

The street facade of New York City’s first certified Passive House, known as Tighthouse, is clad in pale gray stucco, sculpted with a few historic-looking details. But, if you knock on that wall, it sounds hollow: The stucco is merely the outermost layer in a 20-inch-thick insulated sandwich. The original brick is buried deep inside, where it can do no harm—via chinks, cracks, or settling—to the supersealed box this 19th-century, 3,120-square-foot Park Slope house has now become. The cornice, too, is a lightweight contemporary replacement: a hollow fiberglass shell mimicking a wood original.


The smooth, low-maintenance surfaces are a far cry from the derelict three-story row house designer Julie Torres Moskovitz first saw in 2009. The brownstone’s front facade was pocked and cracked, the back wall was falling apart, and the interior left a warren of mystery rooms (including one lined with a one-way mirror). The owners, a young couple just starting a family, weren’t daunted by the damage because they wanted a clean, modern renovation to showcase their art collection. “The owners say they don’t like anything organic,” says Torres Moskovitz. “Only concrete and steel.”


All of the Jenn-Air appliances, including the washer and dryer, are electric, as the owners asked the city to cut the gas line to the house. The kitchen cabinetry is from Ikea and features custom matte gray doors and Silestone countertops. The floorboards are reclaimed maple from an old tire factory, sanded and stained gray.

The original idea was a net-zero house. “That concept starts with using less rather than producing more,” says one of the owners. “We wanted to put less stress on the communal infrastructure.” He began researching Passive Houses, visiting an early iteration in Philadelphia and collecting consultants’ names, including Torres Moskovitz of the environmentally focused Brooklyn design practice Fabrica 718. At his encouragement, Torres Moskovitz completed Passive House trainings in New York and Dublin; she is now a certified Passive House tradesman.



Passive House certification is performance-based, focused not on any renewable or recycled materials used but on how efficiently the building breathes, heats, and cools. That meant that much more than the original facade had to go. Torres Moskovitz specified triple-glazed, argon-gas Schüco windows and doors for the front and back. On the parlor floor, the windows have the same tall, lean proportions as those of traditional brownstones, but they are mullion-free and have a special coating that helps warm the house in the winter. Within the white walls, mounted on studs and insulated with medium-density foam, the windows have been individually sealed with an Intello Plus membrane and Tescon Profil tape. “It’s akin to gift-wrapping,” says Torres Moskovitz. “The materials cost about $3,500, and it took two weeks to seal every window.” The owner and the architectural designer had to seal a window themselves to convince their contractor, generally an ally, that it was worth the extra elbow grease.


Torres Moskovitz describes her clients as “members of the iPhone generation. They think everything should be as intuitive, as simple, and as low-maintenance.” Given the high standards for the Passive House envelope, they wanted to spend their budget on the exterior and were willing to economize on finishes inside. “The house was built in 1899, and in those 100-odd years no one had ever substantially renovated the infrastructure,” says the owner. “This was our big chance to make changes.” To make those interior economies look good, the home’s materials palette was left minimal, assuming the clients’ art would provide color later. “Julie did a fantastic job with the architecture,” says one owner. “Those beautiful moments don’t need accentuating.”


While the proportions of the old brownstone’s facade remain congruous with others on its street, the stone has been replaced with stucco over foam. When knocked, it sounds entirely hollow.

One such moment is the decision to open up the back of the house with larger, north-facing windows in the open kitchen. This might seem like a no-no—more glass has the potential for more heat loss—but the Passive House Planning Package, a proprietary energy-modeling software, makes it easy to weigh trade-offs. Even more light is filtered into the dark center of the row house via a three-story light well, which creates catwalk-like hallways on the second and third floors.

All that remains of the original interiors is a multistory brick wall that stretches up three floors from the center of the parlor. But even this is less authentic than it appears: The owner wanted a respite from the white and gray and requested an exposed brick wall. But brick parti walls are often leaky, due to old mortar and irregular repairs. So the contractor made the real parti wall airtight with a paint-on sealant and then built a new brick wall in front, reusing brick from the two disassembled chimneys. Why no fireplace? Think about it, Torres Moskovitz says: “It’s essentially a hole through your house.”






Click here for the complete post

About the Editor:

RJ Diaz is a renovation and remodeling construction management executive in New York City. RJ is passionate about high quality, well-crafted construction and started RenovatingNYC in 2010 to share news and information specific to the industry as well as profile the best resources essential for a project’s success. For advice about your own renovation or remodeling plans, preliminary cost estimates and project opportunities, please contact RJ using the form below.